Yunnan Provincial First People's Hospital - Kunming Multi-parking Garage Case Study

Yunnan Provincial First People's Hospital - Kunming Multi-parking Garage Case Study
Yunnan Provincial First People's Hospital - Kunming Multi-parking Garage Case Study
Yunnan Provincial First People's Hospital - Kunming Multi-parking Garage Case Study
Yunnan Provincial First People's Hospital - Kunming Multi-parking Garage Case Study
Yunnan Provincial First People's Hospital - Kunming Multi-parking Garage Case Study
+
  • Yunnan Provincial First People's Hospital - Kunming Multi-parking Garage Case Study
  • Yunnan Provincial First People's Hospital - Kunming Multi-parking Garage Case Study
  • Yunnan Provincial First People's Hospital - Kunming Multi-parking Garage Case Study
  • Yunnan Provincial First People's Hospital - Kunming Multi-parking Garage Case Study
  • Yunnan Provincial First People's Hospital - Kunming Multi-parking Garage Case Study

I. Brief Introduction to the Kunming Multi-Storey Car Park Case Study - Yunnan Provincial First People's Hospital Project:

 

 Kunming Multi-Storey Car Park Case Study - Yunnan First People's Hospital

 

Project Name: Yunnan Provincial First People's Hospital

 

Project Address: No. 157, Jinbi Road, Xishan District, Kunming City

 

Equipment Type: PSH Lifting and Shifting Type Multi-Storey Car Park (Five Layers)

 

Construction Time: 2009


II. Simplified Diagram of PSH Five-Layer Lifting and Shifting Parking Equipment

 

 Diagram of the Principle of the Multi-Storey Car Park in Yunnan


III. Operating Principle of PSH Five-Layer Lifting and Shifting Multi-Storey Car Park


The PSH 5-layer lifting and shifting multi-storey car park can achieve the separation of people and vehicles, suitable for increasing parking spaces in newly built and old residential areas. Its operating principle is intelligent three-dimensional storage of cars through the lifting and shifting of the car carrier plate. Multi-Storey Parking Equipment. The topmost car carrier plate is only used for lifting, the ground floor car carrier plate is only used for shifting, and the middle 2-4 layers can both lift and shift.

 

 

When parking, the user drives the car to the parking equipment with an available parking space, selects the target mechanical parking space, and enters the password or swipes the card. The parking space below the target parking space's car carrier plate shifts to form a descending channel for the target parking space. The car carrier plate of the target parking space descends to the ground through the lifting system, and the safety gate automatically rises (if any). The user drives the car into the car carrier plate of the multi-storey car park in reverse. Reversing into the space is based on international parking safety considerations. After the user has parked the vehicle properly, they leave the car carrier plate and swipe their card again at the control panel. At this time, the safety gate automatically lowers (if any). The parking system will automatically store the vehicle in the target parking space, and the entire parking process is complete. 
 
When retrieving the vehicle, the user swipes their card or enters the password, and the parking space below the target parking space shifts to form a descending channel for the target parking space. The target parking space descends to the ground through the lifting system, and the safety gate automatically rises. The user drives the vehicle out of the multi-storey car park and swipes their card again, and the safety gate automatically lowers, completing the entire retrieval process.


IV. Features and Applicable Scope of PSH Five-Layer Lifting and Shifting Multi-Storey Car Park


The Yunnan First People's Hospital multi-storey car park adopts a combination of multi-storey car park and office space. The top floor is office space, and floors 1-5 are the multi-storey car park, solving both the hospital's parking and office space needs while increasing parking spaces. This type of multi-storey parking equipment mainly uses motor-driven steel wire rope lifting, large-span design, PLC automatic control, and has more than 20 safety devices. It can be built up to 8 layers, has high space utilization, is energy-efficient and environmentally friendly, and is suitable for open-air areas in residential areas, office buildings, etc. This type of parking equipment can also be designed as a three-unit or six-unit system, and the specific number of parking spaces per group can be customized according to site conditions.

 

 Kunming Hospital Multi-Storey Car Park Project Combining Offices and Multi-Storey Car Park


V. About Multi-Storey Car Park Manufacturers


Shandong Tada Auto Parking Co., Ltd., established in 2001, with a registered capital of RMB 200 million, has a Swiss R&D center, and is a professional company integrating R&D design, manufacturing, engineering installation, and after-sales service, relying on the two major steel giants, Shandong Iron and Steel and Shagang. Multi-Storey Car Park Manufacturer.

 

 PSH 5-Layer Lifting and Shifting Multi-Storey Car Park Manufacturer

 

 

 

Online Message

If you are interested in our products, please contact us immediately!

Share to: