What issues should be considered for a tower-type automated parking garage?
Release Time:
2021-01-26
Vertical lift type mechanical parking equipment, also known as tower-type parking garages, can generally reach up to 30 floors. The average floor area per vehicle is less than 1㎡, making it the parking equipment with the highest space utilization and fastest speed among all automatic parking systems. It is suitable for extremely small plots of land in modern cities, solving the problem of high-density parking.
What is a tower parking garage?
Vertical lifting type mechanical parking equipment is also called a tower Parking Garage It uses lifts to vertically lift and lower vehicles or uses vertical circulation to achieve parking. It can generally reach up to 30 floors, covering an area of about 50㎡, with an average area of less than 1㎡ per vehicle. The average retrieval time is 90 seconds. It is the parking equipment with the highest space utilization and fastest speed among all automatic parking systems. It is suitable for extremely small plots in modern cities to solve high-density parking problems.

Tower Parking Garage Parking Process
First, park the car on the entrance and exit platform of the parking tower. The system will generally prompt the user to tighten the handbrake before getting off the car, and after closing the car door, check and retract the antenna and rearview mirrors, etc. The user exits the entrance and exit platform, swipes the card outside the automatic door, and the automatic door falls, achieving separation of people and vehicles to ensure user safety. For users, the most important thing is to observe the signs at the entrance and exit to see if their vehicle meets the requirements for length, width, height, and weight. If it exceeds the limit, it cannot be parked inside. Remember this!
Tower Parking Garage Retrieval Process
The user swipes their card to retrieve the vehicle. After the car goes through the platform exchange or comb exchange, it slowly descends to the entrance and exit level, rotates, and turns the steering wheel. This series of actions is monitored by sensing devices and photoelectric switches in various corners of the tower parking garage to detect the internal operating status of the parking garage.
What types of tower parking garages are there?
Tower parking garages only refer to buildings with a tower-like exterior, while the interior is divided into categories such as vertical circulation and vertical lifting. Vertical lifting is further divided into forms such as platform exchange and comb exchange.
How should tower parking garages be used, maintained, and repaired?
Generally Parking Towers require operation and management by specially trained personnel (holding special equipment operation certificates). When parking, users should park according to the instructions of the parking attendant.
Tower parking garages are composed of steel structures and many detection switches. The internal structure is complex. During completion acceptance, they generally must pass acceptance by the local technical supervision department and special inspection institute before they can be used. They are a type of special equipment subject to the "Special Equipment Safety Law." Like elevators, they need annual inspections every year, and only equipment that passes the annual inspection can be used by users. Therefore, tower parking garages must undergo annual safety inspections and maintenance by professional manufacturers. The maintenance and repair of tower parking garages must be carried out by units with parking equipment maintenance and modification qualifications. Each tower parking garage manufacturer's tower parking garage has different features, so it is best to have the parking garage's manufacturer perform maintenance and modification. This is mainly because the manufacturer is familiar with the technical characteristics and safety points of its products, and the price of customized parts is also cheaper.

Related Content
undefined