Swiss R & D Center
How to install a home three-dimensional garage video demonstration
Published on:
2019-07-25
Household three-dimensional garages are mainly used in villas and private parking spaces to multiply parking spaces, and are currently mainly exported to Europe, America and other countries. This three-dimensional garage video shows the whole process of how to install a three-dimensional garage.
The installation steps of the home three-dimensional garage are as follows:
Home three-dimensional garage installation step 1: laying out the foundation and punching holes
1. Ground requirements: Concrete thickness ≧ 200mm, label ≧ C20, surface levelness ≦ 5mm measured with a ruler with a length of 2m.
2. Drill a Ø22 hole with a depth of 120mm and install M16*100 expansion bolts.
Home three-dimensional garage installation step two: equipment column installation
1. Connect the column support assembly and outrigger assembly at point A with 6-M16*55 bolts and install them in the direction shown in the above figure.
2. Adjust the verticality of the column, ≦2mm.
Step 3 of the home three-dimensional garage installation: connect the guide plate and the installed column support assembly.
Step 4 of the home three-dimensional garage installation: Assemble the table and bracket and tighten the bolts.
Step 5 of the home three-dimensional garage installation: from above the column support assembly, put the assembled table and bracket along the C-shaped guide rail.
Step 6 of the installation of the home three-dimensional garage: Install the lifting mechanism and the oil cylinder.
Step 7 of the home stereo garage installation: Install the lock release mechanism and adjust the length of the pull rod.
Step 8 of the home three-dimensional garage installation: Install the stop block and the operating lever, and adjust the stop block according to the height of the parking on the ground floor.
Step 9 of the home stereo garage installation: connect the hydraulic cylinder and the power unit with the high-pressure oil pipe, and install the control cabinet installation bracket with the equipment, or choose a suitable location for installation.
The above are the simple three-dimensional garage installation steps. For the first installation, please install it under the guidance of an engineer.
Related Video