PSH3 Pit Model Puzzle Parking System

 Sunken PSH3-layer lifting and shifting three-dimensional parking garage

 

Equipment Features

 

PSH3 type puzzle parking garage. It is currently the most widely used mechanical parking solution on the market, and it is also one of the mechanical parking garage types with the highest market share in China. 
 
The PSH sunken 3-layer lifting and shifting mechanical parking garage (negative one, positive two) parking equipment uses a motor-driven chain lifting method, which can build a 3-layer mechanical parking garage. It is a mechanical parking garage that combines underground and above-ground spaces. The entrance and exit are on the ground floor, using a large-span design, which is very suitable for construction in green spaces, residential buildings, and office building basements. Compared with similar equipment, it makes full use of the underground space and is a type of equipment with high space utilization. 
 
The PSH sunken 3-layer lifting and shifting parking equipment adopts a parking solution that uses the lifting or shifting of the vehicle carrier plate to achieve vehicle access. Its scale can be large or small, and it can be arbitrarily combined and arranged according to different terrains and spaces. It has high space utilization, reliable equipment safety, fast vehicle access, and simple use and maintenance. Therefore, it is a multi-layer mechanical parking solution with a small footprint, full utilization of underground space, and low construction costs. 
 
The PSH sunken 3-layer lifting and shifting mechanical parking garage can be built on the space of 3 planar parking spaces. It is a mechanical parking solution suitable for the renovation of old residential areas. 
 
 
 

Equipment Composition

 

The PSH 2-layer lifting and shifting mechanical parking garage is mainly composed of steel structure parts, vehicle carrier plates, lifting system, shifting system, transmission parts, safety protection system, and PLC fully automatic control system.

 

 Schematic diagram and dimensions of a pit-type sunken 3-layer lifting and shifting three-dimensional parking garage

Schematic diagram of PSH pit-type 3-layer lifting and shifting mechanical parking garage

 

Equipment Principle

 

The PSH sunken 3-layer lifting and shifting mechanical parking garage is suitable for increasing parking spaces in newly built residential areas and the renovation of old residential areas. Its operating principle is like a Rubik's Cube, using the lifting and shifting of the vehicle carrier plate to achieve intelligent storage of cars. The top and sunken layers of the vehicle carrier plate are only used for lifting, and the ground layer vehicle carrier plate is only used for shifting.

 

When parking, the user drives the car to the parking equipment with an empty parking space, selects the target mechanical parking space, and enters the password or swipes the card. The vehicle carrier plate of the target parking space moves to the ground through the lifting system, and the safety door automatically rises (if any). The user drives the car into the vehicle carrier plate of the mechanical parking garage in reverse. Reversing into the garage is based on international parking safety considerations. After the user parks the vehicle properly, they leave the vehicle carrier plate and go to the control panel to swipe the card again. At this time, the safety door automatically lowers (if any). The parking system will automatically store the vehicle in the target parking space, and the entire parking process is complete. The ground-floor parking spaces of this type of mechanical parking equipment can be directly reversed into the mechanical parking garage after swiping the card. 
 
When retrieving the vehicle, the user swipes the card or enters the password, and the target parking space moves to the ground through the upgrade system, and the safety door automatically rises (if any). The user drives the vehicle out of the mechanical parking garage and swipes the card again, and the safety door automatically lowers, and the entire vehicle retrieval process is complete. 
 
The video above shows how to park in a pit-type lifting and shifting mechanical parking garage.

 

Equipment Parameters

 

Project

Parameter

Remarks

Model

PSH

 

Number of parking spaces

Designed according to needs

 

Parking parameters

Z-type vehicle: 4700MM x 1800MM x 1550MM 1500KG

D-type vehicle: 5000MM x 1850MM x 1550MM 1700KG

T-type vehicle: 5300MM x 1900MM x 1550MM 2350KG

Length x Width x Height Weight

Drive method

Motor + steel wire rope or motor + chain

 

Lifting speed

4-6M/S

 

Shifting speed

8M/S

Set according to needs

Operation method

Button, ID card, automatic, manual

Set according to needs

 

Case Show

 

 

 PSH Beijing Orange Age sunken 3-layer lifting and shifting three-dimensional parking garage mechanical three-dimensional parking equipment

 

 Guangzhou Dongshan Restaurant PSH sunken 3-layer lifting and shifting three-dimensional parking garage mechanical three-dimensional parking equipment

 

Beijing Orange Home, negative one, positive two, sunken 3-layer lifting and shifting mechanical parking garage project

 

Guangzhou Dongshan Restaurant, negative one positive two sunken 3-layer lifting and shifting mechanical parking garage project

 

 Guangxi Zhuang Autonomous Region sunken 3-layer lifting and shifting three-dimensional parking garage mechanical three-dimensional parking equipment

 

 Sichuan Chengdu CNPC underground sunken 3-layer lifting and shifting three-dimensional parking garage mechanical three-dimensional parking equipment

 

Guangxi Autonomous Region People's Hospital, negative one positive two 3-layer lifting and shifting mechanical parking garage project

 

Chengdu CNPC negative one positive two sunken 3-layer lifting and shifting mechanical parking garage project

 

Our Advantages

 

 PSH sunken 3-layer lifting and shifting three-dimensional parking garage product advantages and Laigang Tada garage company advantages

About Us

 

Shandong Tada Auto Parking Co., Ltd., established in 2001, with a registered capital of 200 million RMB, has a Swiss R&D center. It is a professional automated parking system manufacturer integrating R&D design, manufacturing, engineering installation, and after-sales service, relying on the two major steel giants, Shandong Iron and Steel and Shagang.

 

 

 

Cooperation Process

 

 PSH 3-layer sunken lifting and shifting three-dimensional parking garage cooperation process and how to purchase sunken pit three-dimensional parking garage

Contact Us

 

 

Related Downloads

Dimensions of a negative one, positive two, pit-type PSH3 three-layer lifting and shifting three-dimensional parking garage

Online Message

If you are interested in our products, please contact us immediately!

Related Downloads