PSH4A four-layer lifting and sliding puzzle parking system
Equipment Features
The PSH4A Model puzzle automated parking system is currently the most widely used automated parking system solution on the market, and also has the highest market share in China.
The PSH sunken 4-layer puzzle automated parking system (negative one and positive three) parking equipment uses a motor-driven + chain + steel wire rope lifting method. It can build a 4-layer mechanical parking garage combining one underground level and three ground levels. It is a type of automated parking system that combines underground and above-ground spaces, with the entrance and exit on the ground floor. It uses a large-span design and is very suitable for construction in green spaces, residential buildings, and office building basements. Compared with similar equipment, it makes full use of the underground space and has a relatively high space utilization rate.
The PSH sunken 4-layer puzzle parking equipment adopts a parking solution that uses the lifting or shifting of the vehicle platform to achieve vehicle access. Its scale can be large or small, and it can be arbitrarily combined and arranged according to different terrains and spaces. It has high space utilization, reliable equipment safety, fast vehicle access, and simple use and maintenance. Therefore, it is a multi-story and multi-section type with a small footprint, full utilization of underground space, and low construction costs.
The PSH sunken 4-layer puzzle automated parking system can build 10 mechanical automated parking system spaces in the space of 3 flat parking spaces. It is an automated parking system solution suitable for the renovation of old residential areas.
Equipment Composition
The PSH sunken 4-layer puzzle automated parking system mainly consists of a steel structure, vehicle platform, lifting system, shifting system, transmission part, safety protection system, and PLC fully automatic control system.
PSH pit-type 4-layer puzzle automated parking system schematic diagram
Equipment Principle
The PSH sunken 4-layer puzzle automated parking system is suitable for increasing parking spaces in newly built and old residential areas. Its operating principle is like a Rubik's Cube, using the puzzle of the vehicle platform to achieve intelligent storage of cars. The top and sunken layers of the vehicle platform are only used for lifting, and the ground floor vehicle platform is only used for shifting.
When parking, the user drives the car to the parking equipment with an available parking space, selects the target mechanical parking space, and enters the password or swipes the card. The vehicle platform of the target parking space moves to the ground through the lifting system, and the safety gate automatically rises (if any). The user drives the car into the vehicle platform of the automated parking system in reverse. Reversing into the parking space is based on international parking safety considerations. After the user parks the vehicle properly, they leave the vehicle platform and swipe the card again at the control panel. At this time, the safety gate automatically lowers (if any). The parking system will automatically store the vehicle in the target parking space, and the entire parking process is complete. The ground floor parking spaces of this type of automated parking system equipment can be directly reversed into the automated parking system after swiping the card.
When retrieving the vehicle, the user swipes the card or enters the password, and the target parking space moves to the ground through the upgrade system, and the safety gate automatically rises (if any). The user drives the vehicle out of the automated parking system garage and swipes the card again, and the safety gate automatically lowers, and the entire vehicle retrieval process is complete.
Parking video of a negative two and positive two PSH pit-type 4-layer puzzle automated parking system
Equipment Parameters
Project
Parameter
Remarks
Model
PSH
Number of parking spaces
Designed according to needs
Parking parameters
Z-type vehicle: 4700MM x 1800MM x 1550MM 1500KG
D-type vehicle: 5000MM x 1850MM x 1550MM 1700KG
T-type vehicle: 5300MM x 1900MM x 1550MM 2350KG
Length x Width x Height Weight
Drive method
Motor + steel wire rope or motor + chain
Lifting speed
4-6M/S
Shifting speed
8M/S
Set according to needs
Operation method
Button, ID card, automatic, manual
Set according to needs
Case Show
Chengdu Haorui Xinjie negative one and positive three sunken 4-layer puzzle automated parking system project
Beijing Guanghuanxuan Community, negative one and positive three sunken 4-layer puzzle automated parking system
Our Advantages
About Us
Shandong Tada Auto Parking Co., Ltd., founded in 2001, with a registered capital of 200 million RMB, has a Swiss R&D center. It is a professional automated parking system manufacturer integrating R&D design, manufacturing, engineering installation, and after-sales service, relying on the two major steel giants, Shandong Iron and Steel and Shagang.