The pit puzzle automated parking system is currently the most widely used type on the market. This automated parking system solution is also one of the highest market share types of automated parking systems in China.
PSH sunken-pit 5-level pit puzzle automated parking system. The (basement level 2, ground levels 1-3) parking equipment uses motor drive + chain + steel wire rope lifting method, which can build a 5-level mechanical parking garage combining two underground levels and three ground levels. It is an automated parking system garage combining underground and ground levels, with the entrance and exit on the ground floor. It uses a large-span design and is very suitable for construction in green spaces, residential buildings, and office building basements. Compared with similar equipment, it makes full use of the underground space and has a relatively high space utilization rate.
PSH sunken-pit 5-level pit puzzle parking equipment uses a parking solution that uses vehicle plates to lift or shift to achieve vehicle access. Its scale can be large or small, and it can be arbitrarily combined and arranged according to different terrains and spaces. It has high space utilization, reliable equipment safety, fast vehicle access, and simple use and maintenance. Therefore, it is a multi-story, multi-section automated parking system solution with a small footprint, full utilization of underground space, and low construction costs.
The PSH sunken-pit 5-level pit puzzle automated parking system can build 13 mechanical automated parking system spaces in the space of 3 flat parking spaces, which is an automated parking system solution suitable for the renovation of old residential areas.
Equipment Composition
The PSH sunken-pit 5-level pit puzzle automated parking system is mainly composed of steel structure parts, vehicle plates, lifting system, shifting system, transmission parts, safety protection system, and a PLC fully automatic control system.
Schematic diagram of the PSH pit-type 5-level pit puzzle automated parking system
Equipment Principle
The PSH sunken-pit 5-level pit puzzle automated parking system is suitable for increasing parking spaces in newly built and old residential areas. Its operating principle is like a Rubik's Cube, using the pit puzzle of the vehicle plate to achieve intelligent storage of cars. The top and sunken-pit vehicle plates are only used for lifting, and the ground and other layers of vehicle plates are only used for shifting.
When parking, the user drives the car to the parking equipment with an available parking space, selects the target mechanical parking space, and enters the password or swipes the card. The vehicle plate of the target parking space moves to the ground through the lifting system, and the safety door automatically rises (if any). The user drives the car into the vehicle plate of the automated parking system in reverse. Reversing into the parking space is based on international parking safety considerations. After the user parks the vehicle properly, they leave the vehicle plate and swipe the card again at the control panel. At this time, the safety door automatically lowers (if any). The parking system will automatically store the vehicle in the target parking space, and the entire parking process is complete. The ground-level parking space of this type of automated parking system equipment can be directly reversed into the automated parking system garage after swiping the card.
When retrieving the vehicle, the user swipes the card or enters the password, and the target parking space moves to the ground through the upgrade system, and the safety door automatically rises (if any). The user drives the vehicle out of the pit puzzle automated parking system and swipes the card again, and the safety door automatically lowers, and the entire retrieval process is complete.
Parking operation video of PSH pit-type 4-level pit puzzle automated parking system
Equipment Parameters
Item
Parameter
Remarks
Model
PSH
Number of parking spaces
Designed according to needs
Parking parameters
Z-type vehicle: 4700MM x 1800MM x 1550MM 1500KG
D-type vehicle: 5000MM x 1850MM x 1550MM 1700KG
T-type vehicle: 5300MM x 1900MM x 1550MM 2350KG
Length x Width x Height Weight
Drive method
Motor + steel wire rope or motor + chain
Lifting speed
4-6M/S
Shifting speed
8M/S
Set according to needs
Operation method
Button, ID card, automatic, manual
Set according to needs
Why Choose Us
About Us
Shandong Tada Auto Parking Co., Ltd., established in 2001, with a registered capital of 200 million RMB, has a Swiss R&D center. It is a professional automated parking system manufacturer integrating R&D design, production, engineering installation, and after-sales service, relying on the two major steel giants, Shan Steel and Sha Steel.