PSH 8-layer Multi-parking System

 Aerial view of PSH 8-layer lift-and-shift automated parking garage

 

Equipment Features

 

The PSH8 model multi-parking system is currently the most widely used automated parking solution on the market and the type with the highest market share in China. 
 
The PSH 8-layer lifting and sliding automated parking garage mainly uses motor-driven steel wire rope lifting, can be designed with up to eight layers, the entrance and exit are on the ground floor, using a large-span design, very suitable for building in green squares, residential buildings and office building basements, compared with similar equipment, it makes full use of the underground part, and is a type of equipment with high space utilization. 
 
The PSH 8-layer lifting and sliding parking equipment adopts a parking solution that uses the lifting or shifting of the car plate to achieve vehicle access. Its scale can be large or small, and can be arbitrarily combined and arranged according to different terrains and spaces. It has a high space utilization rate, reliable equipment safety, fast vehicle access, and simple use and maintenance. Therefore, it is a multi-layer automated parking solution with small land occupation and low construction cost. 
 
The PSH 8-layer lifting and sliding automated parking garage can build 17 mechanical parking spaces in the space of 3 flat parking spaces, which is a suitable automated parking solution for the renovation of old residential areas. 
 
 Diagram showing dimensions and parameters of PSH 8-layer lift-and-shift automated parking garage
 
Diagram of PSH 8-layer lifting and sliding automated parking garage

 

Equipment Composition

 

PSH 8-layer above-ground lifting and sliding type Automated Parking Garage. It is mainly composed of a steel structure, top frame, horizontal moving frame, car plate, lifting system, horizontal moving system, transmission part, safety protection system, and PLC fully automatic control system.

 

 

Equipment Principle

 

The PSH 8-layer lifting and sliding automated parking garage can achieve separation of people and vehicles, suitable for new residential areas and the renovation of old residential areas to increase parking spaces. Its operating principle is like a Rubik's Cube, using the lifting and horizontal movement of the car plate to achieve intelligent storage of cars. The topmost car plate is only used for lifting, the ground floor car plate is only used for horizontal movement, and the middle 2-7 layers can both lift and move horizontally.

 

When parking, the user drives the car to the parking equipment with an available parking space, selects the target mechanical parking space, and enters the password or swipes the card. The parking space below the target parking space moves horizontally to form a downward channel for the target parking space. The car plate of the target parking space descends to the ground through the lifting system, and the safety door automatically rises (if any). The user drives the car into the parking space of the automated parking garage in reverse. Reversing into the space is based on international parking safety considerations. After the user parks the vehicle properly, they leave the car plate and swipe the card again at the control panel. At this time, the safety door automatically lowers (if any). The parking system will automatically store the vehicle in the target parking space, and the entire parking process is complete. 
 
When retrieving the vehicle, the user swipes the card or enters the password, and the parking space below the target parking space moves horizontally to form a downward channel for the target parking space. The target parking space descends to the ground through the lifting system, and the safety door automatically rises. The user drives the vehicle out of the automated parking garage and swipes the card again, and the safety door automatically lowers, and the entire retrieval process is complete. 
 
Diagram of PSH multi-layer lifting and sliding automated parking garage

 

Equipment Parameters

 

Item

Parameter

Remarks

Model

PSH

 

Number of parking spaces

Designed according to needs

 

Parking parameters

Z-type vehicle: 4700MM x 1800MM x 1550MM 1500KG

D-type vehicle: 5000MM x 1850MM x 1550MM 1700KG

T-type vehicle: 5300MM x 1900MM x 1550MM 2350KG

Length x Width x Height Weight

Drive mode

Motor + Steel wire rope

 

Lifting speed

4-6M/S

 

Horizontal movement speed

8M/S

Set according to needs

Operation method

Button, ID card, automatic, manual

Set according to needs

 

Case Show

 

 

 Thailand 8-layer lift-and-shift automated parking garage case study

Thailand 8-layer automated parking garage case

 

 

 

Our Advantages

 

 Advantages of PSH 8-layer lift-and-shift automated parking garage and advantages of Lai Steel Tada Garage Company

About Us

 

Shandong Tada Auto Parking Co., Ltd. was founded in 2001 with a registered capital of 200 million RMB. It has a Swiss R&D center and is a professional company integrating R&D design, manufacturing, engineering installation, and after-sales service, relying on the two major steel giants, Shan Steel and Sha Steel. Automated Parking Garage Manufacturer.

 

 

 

Cooperation Process

 

 Cooperation process and how to purchase a PSH 8-layer lift-and-shift automated parking garage

Contact Us

Related Downloads

Dimensions and planning requirements for an eight-story PSH vertical lift and transfer parking garage

Online Message

If you are interested in our products, please contact us immediately!

Related Downloads